ColdLogik CL20 RF

USystems ColdLogik CL20 RF 'Retrofit Frame' & Rear Door Heat Exchanger

Keeping Old - 'New'

Invariably 'Hot Spots' develop over a period of time and not at the beginning when first setting up a data centre. Many data centres represent a city skyline with a host of different manufactures cabinets. Should a 'Hot Spot' occur it could be cost prohibitive to make major infrastructure changes, with this in mind USystems have developed the CL20 Retrofit Frame.

The CL20 Retrofit Frame has been designed to easily assemble onto third party cabinets allowing the CL20 RDHx to be fitted and therefore provide precision cooling exactly where it is wanted. This in turn is linked up with either the CL150 or CL6.2 Cooling Distribution Unit, providing a cost effective solution.

The CL20 Retrofit solution assists the incumbent CRAC units in lowering the ambient temperature in the room at the same time as stopping hot spots from developing by preventing recycling of the hot air waste.

NB. Due to the numerous cabinet frame designs on the market, different framework will be required to support the door and a site visit will be required. It may also be necessary to replace the front door owing to inadequate air to metal perforation.

The Retrofit CL20 Frame is fitted directly to the to the IBM frame. Providing the necessary structural support for the CL20 RDHx.

The CL6.2 CDUs can be housed in their own dedicated cabinets such as the USpace 6210 and 7210 cabinets fitted with a rear manifold or be housed in the cabinet which is to be cooled.